Mainline Products - Wide range of rainscreen fixings & accessories
Mainline Products Ltd
Tel: + 44 (0)1782 629 270

Alucobond®

Alucobond®

Alucobond® is a lightweight aluminium composite panel with a fire retardant, mineral wool core. Fixings below are to be used when installing Alucobond® PLUS and Alucobond® A2 Panels.

Timber Fix – 9.5mm Sliding Point – No Fixed Point
  • Stainless Steel Low Profile Screw 4.8mm

    Product code: SWLP 4.8 x 25 / SWLP 4.8 x 38

    A low profile screw with a 12mm head and a woodscrew thread. To face fix panels to timber.
    Manufactured from A2 Grade Stainless Steel with a large high load bearing head.

    Supplied in boxes of 100.

    Size
    Colour
    Quantity : 100 x Add to quote
  • Centralising Tool CT9049-STEP

    Product code: CT9049-STEP

    Used on pre-drilled panel to ensure a concentric hole is drilled in the timber behind the panel. The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.

    Quantity Add to quote
  • Spare Centralising Tool Drill Bit for Timber

    Product code: CT-STEP-049030

    A replacement drill bit, fitting our centralising tool. Specifically used for drilling into timber.

     

    Quantity Add to quote
Face-fix Sub-frame and Cassette Joint Recess Screw
  • Stainless Steel Low Profile Screw – Self Drilling

    Product code: SWLP/SD/4.8 x 25/S

    A2 Stainless Steel low profile screw with a 12mm head and a self-drilling tip.
    To face fix panels to aluminium – ESL 15mm

    4.8 x 25 mm

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
  • Bi-metallic Stainless Steel Low Profile Screw – Self Drilling 12mm

    Product code: SWLP/SD/5.5 x 35/S

    Bi-metallic A2 Stainless Steel low profile screw with a 12mm head and a self-drilling tip.
    To face fix panels to aluminium – ESL 8mm

    5.5 x 35 mm

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
  • Bi-metallic Stainless Steel Low Profile Screw – Self Drilling 12.7mm

    Product code: SWLP/SD/7140/4.8 x 20 BI

    Bi-metallic A2 Stainless Steel low profile screw with a 12.7mm head and a self-drilling tip. To face fix panels to aluminium and steel. ESL 8mm

    4.8 x 20 mm

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
Side Stitching Rivet for ACM Cassettes and Flashings / Copings etc..
  • Rivet for Aluminium 4.0 x 12mm

    Product code: RBD 4.0 x 12/AS/MG

    4.0 x 12 x 8mm head rivet – Grip Range 4.0 – 9.0mm
    Aluminium body – Stainless Mandrel

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
  • Rivet for Aluminium 4.8 x 15mm

    Product code: RBD 4.8 x 15/AS/MG

    4.8 x 15 x 9.9mm head rivet – Grip Range 4.5 – 11.0
    Aluminium body – Stainless Mandrel

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
  • Rivet for Aluminium 4.8 x 12mm

    Product code: RBC 4.8 x 12/AS

    4.8 x 12 x 120° head rivet – Grip Range 6.0 – 8.0mm
    Aluminium body – Stainless Mandrel

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
Rivet Fix for panels under 1 Meter Wide – 7.0mm Sliding Point – No Fixed Point
  • Rivet for Aluminium 5.0 x 12 x 11mm

    Product code: SSAL5/5.0 x 12 x 11

    5.0 x 12 x 11mm head rivet
    Grip Range 6 – 8mm
    AlMg5 Aluminium body – Stainless Mandrel

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
  • Centralising Tool CT6551

    Product code: CT6551

    Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.

    The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.

    Quantity Add to quote
  • Replacement Drill Bit for Centralising Tool 5.1mm

    Product code: CT-HDRLG-5.1

    Replacement Drill Bit for Centralising Tool 5.1mm.

     

    Quantity Add to quote
  • Rivet Spacer Nose Piece for Aluminium K11

    Product code: RT/ACB/NP/AL/K11

    Rivet spacer nosepiece – used to set the rivet off the panel face by 0.3mm

    Quantity Add to quote
  • HSS Step Drill 5.1mm x 7.0mm

    Product code: STEP-051070

    HSS step drill

    Used for drilling aluminium sub frames and panels simultaneously.

    Diameter – 5.1mm x 7.0mm.

     

    Quantity Add to quote
Rivet Fix for panels over 1 Meter Wide – 8.5mm Sliding Point – No Fixed Point
  • Rivet for Aluminium 5.0 x 12 x 14mm

    Product code: SSAL5/5.0 x 12 x 14

    5.0 x 12 x 14mm head rivet
    Grip Range 6 – 8mm
    AlMg5 Aluminium body – Stainless Mandrel

    Supplied in boxes of 100.

    Colour
    Quantity : 100 x Add to quote
  • Centralising Tool CT8051

    Product code: CT8051

    Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.

    The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.

    Quantity Add to quote
  • Replacement Drill Bit for Centralising Tool 5.1mm

    Product code: CT-HDRLG-5.1

    Replacement Drill Bit for Centralising Tool 5.1mm.

     

    Quantity Add to quote
  • Rivet Spacer Nose Piece for Aluminium K14

    Product code: RT/ACB/NP/AL/K14

    Rivet spacer nosepiece – used to set the rivet off the panel face by 0.3mm

    Quantity Add to quote
  • HSS Step Drill 5.1mm x 8.5mm

    Product code: STEP-051085

    HSS step drill

    Used for drilling aluminium sub frames and panels simultaneously.

    Diameter – 5.1mm x 8.5mm.

     

    Quantity Add to quote

Mainline Products UK Ltd

 Unit 3b, Aspect Court, Cannel Row, Silverdale Enterprise Park,
Newcastle under Lyme, Staffordshire, ST5 6SS, UK
 + 44 (0)1782 629 270
 sales@mainlineproducts.co.uk