Fixings and Accessories for Cembrit Fibre Cement Panels
8mm Panels – Cembrit Cover, Cembrit Solid, Cembrit Transparent & Patina (no gasket with Patina)
Product code: SWLP/SD 4.9 x 35 BI
A Self drilling Bi Metallic Stainless Steel low profile screw with a 12mm Head.
Supplied in boxes of 100.
Product code: SWLP 4.8 X 25S
A2 Stainless Steel low profile screw with a 12mm Head and a woodscrew thread. To face fix panels to timber.
Supplied in boxes of 100.
Product code: SWLP 4.8 X 38S
A2 Stainless Steel low profile screw with a 12mm Head and a woodscrew thread. To face fix panels to timber.
Product code: SWLP 4.8 x 38/W
A2 Stainless Steel low-profile screw with a 12mm Head, a woodscrew thread and wings on the shank of the screw to create an oversized hole in the panel
To face fix panels to timber.
4.8 x 38mm
Supplied in boxes of 100.
Product code: R-GAS-LOCKRIB
To be used in conjunction with the above screws on all Cembrit Panels except for Patina.
Product code: CT7549-STEP
Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the timber behind the panel.
Product code: CT-STEP-049030
A replacement drill bit, fitting our centralising tool. Specifically used for drilling into timber.
Product code: CAR080079
Carbide Drill
Designed for drilling clean undamaged holes in Fibre Cement Panels.
8.0mm x 37mm flute x 79mm long.
Product code: SSAL 5/4.0 x 18 x 15
4.0 x 18 x 15mm head rivet
Grip range of 8.0 – 13mm
AIMg5 aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: SSAL 5/4.0 x 25 x 15
4.0 x 25 x 15mm head rivet
Grip range of 12.0 – 18mm
AIMg5 aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: R-GAS-40113-EPDM
For above rivets when installing Cembrit Cover, Solid and Transparent – No Gasket required for Cembrit Patina.
Product code: SPACBUSH-Cembrit
8.8 Dia x 6.0mm Long x 4.1mm Spacer Bush – Aluminium
In some circumstances, this item is not required, please contact Cembrit who will advise.
Product code: CT8541
Centralising Tool – Used on a pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.
Product code: CT-HDRLG 4.1
Replacement Drill Bit for Centralising Tool
Product code: RT/ACB/NP/M/K15
Rivet spacer nosepiece to set the rivet off the panel face by 0.3mm.
Product code: CAR041055
For drilling panel fixed point holes on site.
4.1mm diameter
Product code: CAR090084
For drilling panel sliding points holes on site.
9.0mm diameter
Product code: SSSS 4.0 x 18 x 15
8mm Panels
4.0 x 18 x 15mm Head Rivet
Grip Range: 12.0 – 14.0mm Unpainted
A2 Stainless Body & Mandrel
Supplied in boxes of 100.
Product code: SSSS 4.0 x 25 x 15
For longer grip range requirements
4.0 x 25 x 15mm Head Rivet
Grip Range: 15.5 – 20.5mm Unpainted
A2 Stainless Body & Mandrel
Supplied in boxes of 100.
Product code: R-GAS-40113-EPDM
For above rivets when installing Cembrit Cover, Solid and Transparent – No Gasket required for Cembrit Patina.
Product code: CT7541
Used on predrilled panels to ensure a concentric hole is drilled in the aluminium behind the panel.
Product code: CT-HDRLG 4.1
Replacement Drill Bit for Centralising Tool
Product code: RT/ACB/NP/M/K15
Rivet spacer nosepiece to set the rivet off the panel face by 0.3mm.
Product code: CAR041055
For drilling panel fixed point holes on site.
4.1mm diameter
Product code: CAR08079
For drilling panel sliding points holes on site.
8.0mm diameter
Product code: SSSS/MG 4.8 x 20 x 16
4.8 x 20 x 16mm Head Rivet
Grip Range 9.0 – 16.0mm
A2 Stainless Body & Mandrel
Supplied in boxes of 100
Product code: R-GAS-48113-EPDM
Gasket for above rivets.
Product code: CT-HDRLG 4.9
Replacement Drill Bit for Centralising Tool
Product code: RT/ACB/NP/K16
Rivet Spacer Nosepiece – Used to set the rivet off the panel face by 0.3mm
Product code: CAR049062
Carbide Drill
Designed for drilling clean undamaged holes in Fibre Cement Panels.
4.9mm x 26mm flute x 62mm long.
Product code: CAR080079
Carbide Drill
Designed for drilling clean undamaged holes in Fibre Cement Panels.
8.0mm x 37mm flute x 79mm long.
Product code: CT7549
Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
Suitable for 6, 8 & 10mm panels