Product code: SWLP 4.8 x 25 / SWLP 4.8 x 38
A low profile screw with a 12mm head and a woodscrew thread. To face fix panels to timber.
Manufactured from A2 Grade Stainless Steel with a large high load bearing head.
4.8 x 25mm
4.8 x 38mm
Supplied in boxes of 100.
Product code: SWLP/SD/4.8 x 25/S
A2 Stainless Steel low profile screw with a 12mm head and a self-drilling tip.
To face fix panels to aluminium – ECT 15mm
4.8 x 25 mm
Supplied in boxes of 100.
Product code: SWLP/SD/5.5 x 35/S
Bi-metallic A2 Stainless Steel low profile screw with a 12mm head and a self-drilling tip.
To face fix panels to aluminium – ECT 18mm
5.5 x 35 mm
Supplied in boxes of 100.
Product code: SWLP/SDR/4.8 X 19/ BI/ S12
Bi-metallic A2 Stainless Steel low profile screw
12mm head and a self-drilling tip.
To face fix panels to aluminium and steel.
ECT 2 – 4mm Drive – T25
Supplied in boxes of 100.
Product code: RBD 4.0 x 12/AS/MG
4.0 x 12 x 8mm head rivet – Grip Range 4.0 – 9.5mm
Aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: RBD 4.8 x 15/AS/MG
4.8 x 15 x 9.5mm head rivet – Grip Range 4.5 – 11.0
Aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: RBC 4.8 x 12/AS
4.8 x 12 x 120° head rivet – Grip Range 6.0 – 8.0mm
Aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: SSAL5/5.0 x 12 x 11
5.0 x 12 x 11mm head rivet
Grip Range 6 – 8mm
AlMg5 Aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: CT6551
Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.
Product code: CT-HDRLG-5.1
Replacement Drill Bit for Centralising Tool 5.1mm.
Product code: RT/ACB/NP/AL/K11
Rivet spacer nosepiece – used to set the rivet off the panel face by 0.3mm
Product code: STEP-051070
Step drill
One step site drill bit for 7.0mm hole in the panel and 5.1mm hole in the rail.
Product code: SSAL5/5.0 x 12 x 14
5.0 x 12 x 14mm head rivet
Grip Range 6 – 8mm
AlMg5 Aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: CT8051
Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.
Product code: CT-HDRLG-5.1
Replacement Drill Bit for Centralising Tool 5.1mm.
Product code: RT/ACB/NP/AL/K14
Rivet spacer nosepiece – used to set the rivet off the panel face by 0.3mm
Product code: STEP-051085
Step drill
One step site drill bit for 8.5mm hole in the panel and 5.1mm hole in the rail.