Fixings for use in installing Fibre Cement Panels
Timber Fix – All holes 7.0mm
8mm & 12mm Panels – Tectiva, Materia, Natura, Natura Pro Coated, Pictura, Pictura Pro Coated and Textura
Aluminium Sub-Frame Rivet Face Fix – All holes 11mm
8mm Panels – Tectiva , Materia, Natura, Natura Pro Coated, Pictura, Pictura Pro Coated and Textura
12mm Panels – Materia, Natura, Natura Pro Coated, Pictura, Pictura Pro Coated and Textura
Product code: SWLP 5.5 x 35 x 16mm
A2 Stainless Steel low profile screw with a 16mm head and a woodscrew thread.
To face fix panels to timber.
5.5 x 35 x 16mm
Supplied in boxes of 100.
Product code: MARCYL
Stainless Steel Sleeve for all holes on Pictura Pro Coated and Natura Pro Coated
Product code: CT6549-STEP
Centralising Tool. Used on pre-drilled panel to ensure a concentric hole is drilled in the timber behind the panel.
Product code: CT-STEP-049030
A replacement drill bit, fitting our centralising tool. Specifically used for drilling into timber.
Product code: CAR70074
Drill Bit for 7.0mm hole in timber panels.
Product code: SSAL 5/4.0 x 18 x 15
4.0 x 18 x 15mm head rivet
Grip range of 8.0 – 13mm
AIMg5 aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: SSAL 5/4.0 x 25 x 15
4.0 x 25 x 15mm head rivet
Grip range of 12.0 – 18mm
AIMg5 aluminium body – Stainless Mandrel
Supplied in boxes of 100.
Product code: SPACEBUSH08
Green Bush08 for 8mm panels for all rivets or Red Bush08 on 2 fixed points
Product code: SPACEBUSH12
Green Bush12 for 12mm panels for all rivets or Red Bush12 on 2 fixed points
Product code: GAS/FLT/SA/ASTRO
Single sided foam tape 9mm x 15 meters x 5mm thick
Product code: CT10541
Centralising Tool. Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.
Product code: CT-HDRLG 4.1
Replacement Drill Bit for Centralising Tool
Product code: RT/ACB/NP/M/K15
Rivet spacer nosepiece to set the rivet off the panel face by 0.3mm.
Product code: CAR-110095 Bit
One step site drill bit for an 11mm hole in aluminium.