Prodema HPL
Prodema produces high quality, architectural panels. Prodema cladding panels are highly durable, impact resistant boards with a high grade natural wood veneer. Prodema panel is ideally suited to exterior and interior cladding applications. Fixings for the installation of these panels can be found below.
-
Stainless Steel Low Profile Screw 4.8mm
Product code: SWLP 4.8 x 25 / SWLP 4.8 x 38
A low profile screw with a 12mm head and a woodscrew thread. To face fix panels to timber.
Manufactured from A2 Grade Stainless Steel with a large high load bearing head.Supplied in boxes of 100.
-
Centralising Tool CT7549-STEP
Product code: CT7549-STEP
Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
-
Spare Centralising Tool Drill Bit for Timber
Product code: CT-STEP-049030
A replacement drill bit, fitting our centralising tool. Specifically used for drilling into timber.
-
Rivet for Aluminium 5.0 x 18 x 16mm
Product code: SSAL5/5.0 x 18 x 16
5.0 x 18 x 16mm head rivet
Grip range of 8.0 – 14mm
AIMg5 aluminium body – Stainless MandrelSupplied in boxes of 100.
-
Rivet for Aluminium 5.0 x 25 x 16mm
Product code: SSAL5/5.0 x 25 x 16
5.0 x 25 x 16mm head rivet
Grip range of 12.5 – 19.5mm
AIMg5 aluminium body – Stainless MandrelSupplied in boxes of 100.
-
Centralising Tool CT8551
Product code: CT8551
Centralising Tool – Used on a pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.
-
Replacement Drill Bit for Centralising Tool 5.1mm
Product code: CT-HDRLG-5.1
Replacement Drill Bit for Centralising Tool 5.1mm.
-
Rivet Spacer Nosepiece RT/ACB/NP/K16
Product code: RT/ACB/NP/K16
Rivet Spacer Nosepiece – Used to set the rivet off the panel face by 0.3mm
-
HSS Step Drill 5.1mm x 9.0mm
Product code: STEP-051090
HSS step drill
Used for drilling aluminium sub frames and panels simultaneously.
Diameter – 5.1mm x 9.0mm.
