Rieder Fibre C, Concrete Skin and Oko Skin GRC Panels
Fixings and accessories for GRC panels. Rieder Fibre C, Concrete Skin and Oko Skin by Pura Facades.
-
Stainless Steel Low Profile Screw 4.8 x 38 x 12
Product code: SWLP 48 X 38
A low profile screw with a 12mm head and a woodscrew thread. To face fix panels to timber.
Manufactured from A2 Grade Stainless Steel with a large high load bearing head.Size 4.8 x 38
Supplied in boxes of 100.
-
Centralising Tool CT7549-STEP
Product code: CT7549-STEP
Centralising Tool – Used on pre-drilled panel to ensure a concentric hole is drilled in the aluminium behind the panel.
-
Spare Centralising Tool Drill Bit for Timber
Product code: CT-STEP-049030
A replacement drill bit, fitting our centralising tool. Specifically used for drilling into timber.
-
Carbide Drill 8.0mm x 37mm
Product code: CAR080079
Carbide Drill
Designed for drilling clean undamaged holes in Fibre Cement Panels.
8.0mm x 37mm flute x 79mm long.
-
Rivet for Aluminium 5.0 x 25 x 14mm
Product code: SSAL 5.0 x 25 x 14
5.0 x 25 x 14mm head rivet
Grip range of 16.0 – 21.0mm
Aluminium body – Stainless Mandrel.Supplied in boxes of 100.
-
Centralising Tool CT7551
Product code: CT7551
Centralising Tool. Used on pre-drilled panels to ensure a concentric hole is drilled in the aluminium behind the panel.
The panel must already be pre-drilled prior to using a centralising tool, it creates a perfectly aligned and centred hole.
-
Replacement Drill Bit for Centralising Tool 5.1mm
Product code: CT-HDRLG-5.1
Replacement Drill Bit for Centralising Tool 5.1mm.
-
Rivet Spacer Nosepiece RT/ACB/NP/K14
Product code: RT/ACB/NP/K14
Rivet Spacer Nosepiece. Used to set the rivet off the panel face by 0.3mm
-
Carbide Drill 5.1
Product code: CAR051062
Carbide Drill Bit – 5.1mm Diameter
For drilling fixed point holes on site
-
Carbide Drill 8.0mm x 37mm
Product code: CAR080079
Carbide Drill
Designed for drilling clean undamaged holes in Fibre Cement Panels.
8.0mm x 37mm flute x 79mm long.